Question.
 |
| image source - http://ieltsbuddy.com/ |
This diagram shows the procedure to manufacture bricks for the building industry. Summarize the information by selecting and reporting the main features and make comparisons where relevant.
Structure
• Introduction
• Overview of the main points
• Details paragraphs
Introduction
Paraphrase the question. Write question using your own words.
“The given diagram describes the process of making bricks in the building industry.”
Overview of the main points
Mention the number of steps, begins, and ends.
“Overall, It can be seen 8 steps to complete the process. Starting with the digging up and ending up with culminating in delivery.”
Details paragraphs
This is a process and you should use time connectors where necessary. Time connectors are needed to connect the steps together
“In the first stage, the clay used to create bricks is dug up from the ground by a huge digger. Then, this clay is kept on a metal grid which is used to break it into little pieces. There is a roller to support this. After that, water and sand should be added to the clay. This mixture is created two different types of bricks by placing them in a mould or using wire cutters. Next, the bricks are kept in an oven to dry for 24 to 48 hours. In the next stage, the brick goes to the heating and cooling procedure.
Bricks are heated in a klin at average and then at high temperature. (From 200c to 1300c). Then the cooling process is ongoing for 2 to 3 days. At the last stage, the bricks are packed neatly and delivered”
Full Answer
The given diagram describes the process of making bricks in the building industry.
Overall, It can be seen 8 steps to complete the process. Starting with the digging up and ending up with culminating in delivery.
In the first stage, the clay used to create bricks is dug up from the ground by a huge digger. Then, this clay is kept on a metal grid which is used to break it into little pieces. There is a roller to support this.
After that, water and sand should be added to the clay. This mixture is created two different types of bricks by placing them in a mould or using wire cutters. Next, the bricks are kept in an oven to dry for 24 to 48 hours.
In the next stage, the brick goes to the heating and cooling procedure. Bricks are heated in a klin at average and then at high temperature. (From 200c to 1300c). Then the cooling process is ongoing for 2 to 3 days. At the last stage, the bricks are packed neatly and delivered.
0 Comments